Mitigation of welding distortion and residual stresses via cryogenic CO2 cooling - a numerical investigation

Fusion welding remains the most common and convenient fabrication method for large, thinplate welded structures. However, the resulting tendency to out-of-plane distortion exacts severe design and fabrication penalties in terms of poorer buckling performance, lack of fairness in external appearance, poor fit-up and frequent requirements for expensive rework. There are several ways to mitigate welding distortion and this study concentrates on the use of cryogenic CO2 cooling to reduce distortion. A feasible combination of welding process and cooling parameters, was investigated computationally and the resulting effects on final deformation were predicted. Three different computational strategies were developed and applied to butt-welding and fillet-welding processes, with and without the inclusion of cryogenic cooling. In the first method, a fully transient, uncoupled thermo-elastoplastic model was investigated. This method is comprehensive but not readily applicable to predict welding distortions in complex, industrial-scale, welded structures, due to the large computational requirement. More computationally efficient models are needed therefore and two further models of this type are suggested in this study. The results show good agreement between the different models, despite substantial differences in computational budget. In butt-welded plates, a significant decrease in out-of-plane distortion is obtained when cryogenic cooling is applied. In fillet-welded plates, cooling had much less effect on welding distortion. This was largely due to the size and configuration of the test case assemblies and the fact that the attached stiffener greatly increased the overall stiffness and resistance to contraction forces

Analysis of externally loaded bolted joints : analytical, computational and experimental study

The behaviour of a simple single-bolted-joint under tensile separating loads is analysed using conventional analytical methods, a finite element approach and experimental techniques. The variation in bolt force with external load predicted by the finite element analysis conforms well to the experimental results. It is demonstrated that certain detailed features such thread interaction do not need to be modelled to ensure useful results. Behaviour during the pre-loading phase of use agrees with previous long-standing studies. However, the pre-loading analysis does not carry over to the stage when external loading is applied, as is normally assumed and it is shown that the current, conventional analytical methods substantially over-predict the proportion of the external load carried by the bolt. The basic reason for this is shown to be related to the non-linear variation in contact conditions between the clamped members during the external loading stage

Muon Capture on the Proton and Deuteron

By measuring the lifetime of the negative muon in pure protium (hydrogen-1), the MuCap experiment determines the rate of muon capture on the proton, from which the proton's pseudoscalar coupling g_p may be inferred. A precision of 15% for g_p has been published; this is a step along the way to a goal of 7%. This coupling can be calculated precisely from heavy baryon chiral perturbation theory and therefore permits a test of QCD's chiral symmetry. Meanwhile, the MuSun experiment is in its final design stage; it will measure the rate of muon capture on the deuteron using a similar technique. This process can be related through pionless effective field theory and chiral perturbation theory to other two-nucleon reactions of astrophysical interest, including proton-proton fusion and deuteron breakup.Comment: Submitted to the proceedings of the 2007 Advanced Studies Institute on Symmetries and Spin (SPIN-Praha-2007

Site investigation for the effects of vegetation on ground stability

The procedure for geotechnical site investigation is well established but little attention is currently given to investigating the potential of vegetation to assist with ground stability. This paper describes how routine investigation procedures may be adapted to consider the effects of the vegetation. It is recommended that the major part of the vegetation investigation is carried out, at relatively low cost, during the preliminary (desk) study phase of the investigation when there is maximum flexibility to take account of findings in the proposed design and construction. The techniques available for investigation of the effects of vegetation are reviewed and references provided for further consideration. As for general geotechnical investigation work, it is important that a balance of effort is maintained in the vegetation investigation between (a) site characterisation (defining and identifying the existing and proposed vegetation to suit the site and ground conditions), (b) testing (in-situ and laboratory testing of the vegetation and root systems to provide design parameters) and (c) modelling (to analyse the vegetation effects)

The impact of neighbourhood walkability on the effectiveness of a structured education programme to increase objectively measured walking

Background: Incorporating physical activity into daily activities is key for the effectiveness of lifestyle education interventions aimed at improving health outcomes; however, consideration of the environmental context in which individuals live is not always made. Walkability is a characteristic of the physical environment, and may be a potential facilitator to changing physical activity levels.  Methods: Using data collected during the Walking Away from Diabetes randomised controlled trial, we examined the association between the walkability of the home neighbourhood and physical activity of participants. We also determined whether home neighbourhood walkability of participants was associated with the intervention effect of the education programme.  Results: Data from 706 participants were available for analysis. Neighbourhood walkability was not significantly associated with any of the physical activity measures at baseline, or at 12, 24 or 36 months following the intervention (p>0.05 for all). There was no association between walkability and change in purposeful steps/ day from baseline to 36months in the usual care or intervention arm; 25.77 (-99.04, 150.58) and 42.97 (-327.63, 413.45) respectively.  Conclusion: Neighbourhood walkability appeared to have no association with objectively-measured physical activity in this population. Furthermore, the walkability of participant’s neighbourhood did not influence the effectiveness of a lifestyle programme

Economic assessment of use of pond ash in pavements

The paper introduces a new type of industrial waste-based subbase material which can replace conventional subbase material (CSM) in pavement construction. Utilisation of this industrial waste, namely pond coal ash produced from a thermal power plant in road construction will help to reduce the disposal problem of this waste and also will help to reduce the problem of scarcity of CSM. Lime and fibre were also added to the pond ash at various percentages to improve the suitability of this type of mix as subbase material. The optimum service life of pavement is studied with the help of numerical modelling and the cost benefit is also presented in the current study. The study reveals that stabilisation of the coal ash with 2% lime may produce an optimal material and, even though a greater thickness may be required to deliver the same pavement performance, direct cost savings of around 10% may be achieved in addition to less easily quantifiable environmental benefits. Design charts are provided to exploit the findings

Alcohol taxes’ contribution to prices in high and middle-income countries : data from the International Alcohol Control Study

The paper draws on data from six participating countries of the International Alcohol Control Study to examine and evaluate their comparative prices and tax regimes. Both ad valorem and specific per unit of alcohol taxation systems are represented among the six countries. The prices differ widely between countries even though presented in terms of Purchasing Power Parity. The percentage of tax in the final price also varies widely but is much lower than the 75% goal set by the World Health Organization. There is a higher proportion of abstainers in middle-income countries and men drink much more alcohol than women

Crossing borders: new teachers co-constructing professional identity in performative times

This paper draws on a range of theoretical perspectives on the construction of new teachers’ professional identity. It focuses particularly on the impact of the development in many national education systems of a performative culture of the management and regulation of teachers’ work. Whilst the role of interactions with professional colleagues and school managers in the performative school has been extensively researched, less attention has been paid to new teachers’ interactions with students. This paper highlights the need for further research focusing on the process of identity co-construction with students. A key theoretical concept employed is that of liminality, the space within which identities are in transition as teachers adjust to the culture of a new professional workplace, and the nature of the engagement of new teachers, or teachers who change schools, with students. The authors argue that an investigation into the processes of this co-construction of identity offers scope for new insights into the extent to which teachers might construct either a teacher identity at odds with their personal and professional values, or a more ‘authentic’ identity that counters performative discourses. These insights will in turn add to our understanding of the complex range of factors impacting on teacher resilience and motivation

Production and Decay of D_1(2420)^0 and D_2^*(2460)^0

We have investigated $D^{+}\pi^{-}$ and $D^{*+}\pi^{-}$ final states and observed the two established $L=1$ charmed mesons, the $D_1(2420)^0$ with mass $2421^{+1+2}_{-2-2}$ MeV/c$^{2}$ and width $20^{+6+3}_{-5-3}$ MeV/c$^{2}$ and the $D_2^*(2460)^0$ with mass $2465 \pm 3 \pm 3$ MeV/c$^{2}$ and width $28^{+8+6}_{-7-6}$ MeV/c$^{2}$. Properties of these final states, including their decay angular distributions and spin-parity assignments, have been studied. We identify these two mesons as the $j_{light}=3/2$ doublet predicted by HQET. We also obtain constraints on {\footnotesize $\Gamma_S/(\Gamma_S + \Gamma_D)$} as a function of the cosine of the relative phase of the two amplitudes in the $D_1(2420)^0$ decay.Comment: 15 pages in REVTEX format. hardcopies with figures can be obtained by sending mail to: [email protected]